山東創圖建筑裝飾工程有限公司 山東創圖建筑裝飾工程有限公司
加工技術熱線:18660816658 網站地圖
  • 您當前位置: 首頁>>新聞動態>>行業動態>>抗倍特板施工中起泡原因怎么進行避免?

    行業動態

    抗倍特板施工中起泡原因怎么進行避免?

    來源:http://www.shoxee.com/ 日期:2021-12-09 發布人:admin
    抗倍特都是由英文“Compact Laminate”音譯而來,抗倍特板是由裝飾色紙含浸三聚氰胺樹脂,加上多層黑色或褐牛皮紙含浸酚醛樹脂層疊后,再用鋼板經由高溫(150℃)高壓(1430psi)的環境壓制而成,厚度從1.6mm到25mm皆可制作??贡短匕迨褂眠^程中有時候會出現起泡現象,那如何找到抗倍特板板起泡的原因及怎樣去解決起泡的原因呢。
    Kangbeite is transliterated from "compact laminate" in English. Kangbeite plate is made of decorative colored paper impregnated with melamine resin, multi-layer black or brown kraft paper impregnated with phenolic resin, and then pressed by steel plate under high temperature (150 ℃) and high pressure (1430psi). The thickness can be made from 1.6mm to 25mm. Blistering sometimes occurs during the use of anti magnification plate. How to find the cause of blistering and how to solve it.
    首先,如果起泡處挑破后現牛皮紙底板,則說明所購買的抗倍特板有問題,質量不好。如果是起泡出挑破后現基材,則說明施工不成熟,為施工不當造成的原因。下面就來介紹下導致抗倍特板起泡的施工原因及避免方法。
    First of all, if the kraft paper bottom plate is found after the blister is broken, it indicates that the purchased anti magnification plate has a problem and the quality is not good. If the base material appears after bubbling and breaking, it indicates that the construction is immature, which is caused by improper construction. The following is to introduce the construction causes and avoidance methods of anti double plate foaming.
    富美家裝飾板
    抗倍特板起泡的施工原因:
    Construction reasons for blistering of anti magnification plate:
    施工時施壓不夠,不均勻
    Insufficient and uneven pressure during construction
    膠水局部未干就貼合;
    The glue is not dry locally;
    晾置時間不夠,不均勻
    The drying time is not enough and uneven
    濕氣重,出現假干現象
    Heavy moisture and false dryness
    板材潮濕,粘不牢;
    The board is wet and cannot be adhered firmly;
    膠水涂刷局部過多,干不了;
    Too much glue can not be applied locally;
    膠水局部缺膠。
    Local glue shortage.
    抗倍特板起泡的避免方法;
    Methods to avoid blistering of anti doubling plate;
    均勻用力施壓致防火板貼合。
    Apply pressure evenly to make the fireproof board fit.
    適當延長晾置時間
    Properly extend the drying time
    通風干燥、用太陽燈照射或跟換場所;
    Ventilate and dry, shine with a sun lamp or change places;
    粘物晾干或烘干后再使用;
    The sticky material can be used after drying or drying;
    均勻、一次刮膠。
    Apply glue evenly and once.
    聯系我們

    產品銷售熱線:18660816658

    技術方案咨詢:18560211715

    倉庫地址:濟南市槐蔭區河海工業園9號

    九江工廠:九江市江東大道3號

    臺灣新竹工廠:臺灣新竹

    泰國曼谷工廠:泰國曼谷

    關注我們
    山東創圖建筑裝飾工程有限公司 備案號:魯ICP備14019259號-2 網站地圖 xml txt 技術支持:網站建設·推廣運營流量統計:

    截屏,微信識別二維碼

    微信號:18660816658

    中国熟妇露脸videos_幻女free性zozo交黑人_人与嘼av免费_chinese丰满熟妇xvideos